Indications

Create indications

An indication is a time counter. It is automatically generated when the indicator start conditions are met. It shows time indications and the current state of the agreement for a particular record, so the users can track the level of the service quality target indicators.

When an indicator record is created, it specifies the key timestamps and a link to the related record. Time indicators are automatically recalculated with the periods specified in the settings. Also, the recalculation of time indicators occurs in cases of counting pauses, cancelations, or when the indication stops.

caution

Note that:

• For new indications (sys_indication) business rules of type before do not work.
• For new indications (sys_indication) business rules of type after work asynchronously.
• The creation of new columns for the Indication (sys_indication) and Indicator (sys_indicator) tables is prohibited.

To check the indication for a record, complete the steps below:

1. Open the required record.
2. In the Related Lists area, select the Timepoints Indication tab.
3. Open the indication record you need to check.

To check the active indications, navigate to Indication Management → Indications.

Indication form fields

Field	Description
Indicator	An indicator that initiated the start of the indication and started the counter. When you clear the Active checkbox or delete an indicator, the related indications are canceled. In the related indication records, the Updated at field displays the time the indication was canceled.
Timezone	The indication timezone.
Record	The original task the agreement counts for.
Breached	The marker that shows whether the agreement has been breached.
Actual time elapsed	Actual time that has elapsed since the indication started, displayed in days, hours, minutes, and seconds. It is calculated on the regular 24/7 basis. The field itself stores duration in milliseconds.
Actual time elapsed in %	The ratio calculated by the formula described below.
Actual time left	Actual time left until the agreement is breached, displayed in days, hours, minutes, and seconds. It is calculated on the regular 24/7 basis. The field itself stores duration in milliseconds.
Start time	The date and time when an indication started.
Complete time	The date and time when a time counter (an indication) stopped.
State	The current state of an indication specified: In progress – an indication is active, and the counter is on. Paused – an indication pauses when the system meets an indicator pause condition. In this case, the Breach time value increases by the pause time duration (or the total pause duration if the indication has been paused more than once).  It works only for the indication where the indicator Breach time value is defined by the indicator duration. When the Breach time value is defined by the field, the pauses are not taken into account. Canceled – an indication cancels counting when the system meets an indicator cancel condition. Completed – an indication counter stops when the system meets stop condition, the agreement is not breached.
Pause on	The last date and time when the indication paused.
Pause time	The total duration of the indication pauses, displayed in days, hours, minutes, and seconds. The field itself stores duration in milliseconds.
Business time elapsed	Business time that has elapsed since the task was started, displayed in days, hours, minutes, and seconds. It counts the working calendar specified in the Schedule field of the original indicator. The field itself stores the duration in milliseconds.
Business time elapsed in %	The ratio calculated by the formula described below.
Business time left	Business time left until the agreement is breached, displayed in days, hours, minutes, and seconds. The calculation counts the working calendar specified in the Schedule field of the original indicator. The field itself stores the duration in milliseconds.
Breach time	The date and time of the agreement breach that the system calculates, taking into account the pause duration, or that is taken from the field defined in the Breach time field of the original indicator.
Original breach time	The original date and time of the agreement breach, calculated at the moment when the system creates an indication, or taken from the Breach time field of the original indicator.

caution

If you have reports based on the indications of the old SLA module, change the report settings and specify the new Indication (sys_indication) table.

Timings and percentages

The indication record contains two sets of fields containing timing information related to the task. These are:

• Actual time elapsed
• Actual time elapsed in %
• Actual time left

and

• Business time elapsed
• Business time elapsed in %
• Business time left

The difference between these values is that the "actual" values are always calculated on the 24x7 basis, while the "business" values take into account the schedule specified for the related indicator.

Example

1. Create an indicator with the following conditions:

Field	Value
Name	Name
Commitment type	Resolution Time
Table	Task
Active	true
Indication start time	Defined by condition
Indication breach time	Defined by duration
Duration	10 minutes
Schedule	24x7
Timezone	Europe/Moscow
Timezone source	Indicator timezone

Start Conditions

Field	Value
Start conditions	State IS In progress
When to cancel	Do not cancel

Pause Conditions

Field	Value
Pause conditions	State IS Postponed

Complete Conditions

Field	Value
Complete conditions	State IS Completed

2. Create a task record:

   1. Navigate to https://{your_instance_url}/record/task.
   2. Fill in the mandatory fields. Move it to the In progress state.
   3. Click Save or Save and exit to apply the changes. An indication starts.

The Start time field of the indication is populated with the time when the indication actually started. The Original breach time field is populated with the time when the indication is to be breached. This value is calculated by summarizing the indication start time and the related indicator duration.

Next, consider a case when an indicator uses a popular schedule "8x5" (5 working days for 8 hours). Using this schedule, the difference between actual and business timings can be considerable. For example, an incident raised at 1 pm on a working day. The indication start condition is defined as "State IS In progress", and an indication complete condition is defined as "State IS Completed." So the incident was taken to work at 2 pm (the indication started), and it was completed at 11 am on the next day (the indication completed). So, its business time elapsed was 5 hours, while the actual time elapsed was 21 hours.

Calculation nuances

---

As mentioned above, the "actual" time values are always calculated on the 24x7 basis, unlike the "business" values. These "business" fields consider the schedule specified in the indicator.

• If the specified schedule is invalid or deleted, the 24x7 schedule is used for calculations.
• A schedule is applied based on the timezone specified in the parent indicator.

note

In formulas below, NOW stands for the current date and time.

Used values

Value	Formula	Description
Start time (ST)	-	Indication start date and time.
Breach time (BrT)	-	Agreement breach date and time. If the breach time is defined by duration, in pause it is counted every time when the indication is recalculated. If the breach time is defined by the field, it does not take PT into account in calculations.
Pause time (PT)	-	Total duration of pauses that is calculated based on the schedule.
Actual duration (AD)	BrT - ST	An actual duration. It is used to calculate the actual time according to the 24x7 schedule.
Indicator duration (D)	-	An indicator duration. It is used in business time calculations according to the specified schedule.
^SCH	-	The ^SCH means that the formula uses the specified schedule when calculating.

caution

The Business time elapsed and Business time left values are calculated based on the schedule specified and stored in the Duration format.

1. The Actual time elapsed (ATE) value is calculated as the difference between the current date and time and the Start time (ST) value.

ATE = NOW - ST

2. The Actual time left (ALT) value is calculated as the difference between the Breach time (BT) value and the current date and time.

ALT = BrT - NOW

After the indication is breached, the Actual time left stops calculating (that is, no more time left). Also, the Actual time elapsed and Actual time left values are stored in the Duration format.

3. The Actual time elapsed in % (ATE%) value is calculated by the formula below:

ATE% = ATE/AD 100 (%)*

4. The Business time elapsed (BET) value can be calculated using the formula below:

BET = (NOW - ST)^SCH - PT

5. The Business time left (BLT) value can be calculated using the formula below:

BLT = (BrT - NOW)^SCH

After the indication is breached, the Business time left stops calculating (that is, no more time left).

6. The Business time elapsed in % (BTE%) can be calculated using the formula below:

BTE% = BET/D * 100 (%)

The maximum value for BTE is 999% by default.

Recalculation of indications

---

The duration of recalculation periods is fixed and cannot be changed.

Time before breach	Recalcultation period, minutes
More than a day	120
From 6 hours to a day	60
From 2 to 6 hours	30
From 30 minutes to 2 hours	10
Less than 30 minutes	1
Indication is breached	120

caution

The indication stops recalculation when the value of the Actual time elapsed in % field reaches 1100.